What I did 12/1 - 12/4

Since we're coming down to the last few days of the assignment I'll do a few updates:

Thomas gave me a link that provided me with a layout for my arduino circuit and the code to program the arduino:

• http://tinkr.de/blog/hack-a-canon-camera-and-controll-it-with-an-arduino/
• Instead of the camera the top two wires (green and blue) are going to the switch wires. Use a low value resistor like 100Ω.
• Then you need to figure out how to program the photocell to turn the trigger  pin to high.

So I laid that out using a bread board. My plan was to add attach the circuit via the override button but that didn't respond. Instead, I found if I hooked the arduino circuit to the photocell wires, then the arduino could control the rotation.